Synthesis and structures of O-anthrylmethyl-substituted hexahomotrioxacalix[3]arenes

O-Alkylation of 7,15,23-tri-tert-butyl-25,26,27-trihydroxy-2,3,10,11,18,19-hexahomo-3,11,19-trioxacalix[3]arene (1H₃) with 9-chloromethylanthracene 5 was carried out under different reaction conditions. Variation of the number of anthrylmethyl group introduced at the phenolic rim of hexahomotrioxacalix[3]arene 1H₃ was achieved through selective O-alkylation using stoichiometric amounts of 9-chloromethylanthracene 5 in acetone to afford the mono-O-alkylated product 2H₂An, the di-O-alkylated product 3HAn₂ and the tri-O-alkylated product partial-cone-4An₃, respectively. Interestingly, by using an acetone/benzene (1:1 v/v) mixed solvent system, the cone-4An₃ was successfully synthesized. These results suggest that the solvent can also control the conformation of the O-alkylation products. The possible reaction routes of the cone-4An₃ and partial-cone-4An₃ are also discussed

A readily accessible multifunctional probe: simultaneous recognition of the cation ZN²⁺ and the anion F⁻ via distinguishable wavelengths

The probe 1 was readily prepared via condensation of 8-formyl-7-hydroxy-coumarin and carbonic dihydrazide in a one-step procedure. Probe 1 exhibited high sensitivity and selectivity towards Zn²⁺ and F⁻ through a “turn-on” fluorescence response and/or ratiometric colorimetric response with low detection limits of the order of 10-8 M. The complex behaviour was fully investigated by spectral titration, isothermal titration calorimetry, 1H NMR spectroscopic titration and mass spectrometry. Interestingly, probe 1 not only recognizes the cation Zn²⁺ and the anion F⁻, but can also distinguish between these two ions via the max wavelength in their UV-vis spectra (360 nm for 1-Zn²⁺ versus 400 nm for 1-F⁻ complex) or their fluorescent spectra (λₑₓ / λₑm = 360 nm/ 454 nm for 1-Zn²⁺ versus λₑₓ / λₑm = 400 nm/ 475 nm for 1-F⁻ complex) due to their differing red-shifts. Additionally, probe 1 has been further explored in the detection of Zn²⁺ in living cells

Quantum-State Engineering of Multiple Trapped Ions for Center-of-Mass Mode

We propose a scheme to generate a superposition with arbitrary coefficients on a line in phase space for the center-of-mass vibrational mode of N ions by means of isolating all other spectator vibrational modes from the center-of-mass mode. It can be viewed as the generation of previous methods for preparing motional states of one ion. For large number of ions, we need only one cyclic operatin to generate such a superposition of many coherent states.Comment: 14 pages, revte

A ratiometric Al³⁺ ion probe based on the coumarin-quinoline FRET system

A coumarin-quinoline based fluorescence resonance energy transfer (FRET) system (TCQ) has been synthesized and employed as a ratiometric fluorescence probe. The selective fluorescent response of the probe TCQ toward Al³⁺ was devised by employing a quinoline moiety as a FRET energy donor with a coumarin moiety as an energy acceptor. The quinoline emission at 390 nm decreased and the coumarin emission at 480 nm increased concurrently on addition of Al³⁺ under excitation wavelength at 253 nm. The TCQ probe exhibited high selectivity for Al³⁺ as compared to other tested metal ions and the ratiometric sensing of Al³⁺ was determined by plotting the fluorescence intensity ratio at 480 nm and 390 nm versus Al³⁺ ion concentration. Moreover, test strips based on TCQ were fabricated, which were found to act as a convenient and efficient Al³⁺ ion detection kit. Furthermore, this system has been used for imaging of Al³⁺ in living cells

Characterization of the aggregation-induced enhanced emission of N,N'-bis(4-methoxysalicylide)benzene-1,4-diamine

© 2015 Springer Science+Business Media New York. N,N′-bis(4-methoxysalicylide)benzene-1,4-diamine (S1) was synthesized from 4-methoxysalicylaldehyde and p-phenylenediamine and it was found to exhibit interesting aggregation-induced emission enhancement (AIEE) characteristics. In aprotic solvent, S1 displayed very weak fluorescence, whilst strong emission was observed when in protic solvent. The morphology characteristics and luminescent properties of S1 were determined from the fluorescence and UV absorption spectra, SEM, fluorescence microscope and grading analysis. Analysis of the single crystal diffraction data infers that the intramolecular hydrogen bonding constitutes to a coplanar structure and orderly packing in aggregated state, which in turn hinders intramolecular C-N single bond rotation. Given that the three benzene rings formed a large plane conjugated structure, the fluorescence emission was significantly enhanced. The absolute fluorescence quantum yield and fluorescence lifetime also showed that radiation transition was effectively enhanced in the aggregated state. Moreover, the AIEE behavior of S1 suggests there is a potential application in the fluorescence sensing of some volatile organic solvents

SURFACE PROPERTIES AND CATALYTIC PERFORMANCE OF Pt/LaSrCoO4 CATALYSTS IN THE OXIDATION OF HEXANE

Perovskite-type La2 –xSrxCoO4 mixed oxides have been prepared by calcination at various temperatures of precipitates obtained from aqueous solutions in the presence of citric or ethylenediamintetraacetic (EDTA) acids, and have been studied by X-ray diffraction (XRD), surface area (BET) measurements, temperature programmed desorption (TPD), temperature programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS). These oxides are catalysts for hexane oxidation, with the greatest activity for LaSrCoO4 calcined at 750 C. This has extensive oxygen vacancies and large internal surface area. Pt-modified LaSrCoO4 catalysts are significantly more active than the Pt-free system. Both surface and bulk phases of the preovskitetype oxides contribute to hexane oxidation. KEY WORDS: Perovskite-type A2BO4, Surface properties, Catalytic performance, Temperature programmed desorption (TPD), Temperature programmed reduction (TPR), and X-ray photoelectron spectroscopy (XPS), Hexane oxidation Bull. Chem. Soc. Ethiop. 2007, 21(2), 271-280